PVC Coated Tarpaulins Manufacturer & Supplier
Zhejiang Hanlong New Material Co., Ltd. is a direct manufacturer of PVC coated tarpaulins, operating our own weaving and processing factories in China. We supply a full range of coated fabrics for architectural membranes, tents, inflatables, truck covers, construction protection, and high-speed door systems. With ISO 9001 quality management certification and an annual output of over 9 million square meters, we support OEM and ODM projects with consistent quality and technical expertise.
Our PVC Coated Tarpaulins are built on high-tenacity polyester scrims and advanced coating formulations, delivering waterproofing, flame retardancy, UV resistance, and durability across demanding environments. We serve global procurement managers, plant engineers, and project managers who need reliable material performance and application-specific customization.
Our Product Range
We organize our PVC coated tarpaulins into seven application-focused categories. Each type is engineered for specific mechanical and environmental demands, and we can adjust weight, color, finish, and additives to match your project.
| Category |
Typical Weight Range |
Key Applications |
| PVC Membrane Fabric |
750–1500 gsm |
Stadium roofs, tensile structures, canopies |
| PVC Tent Fabric |
380–1050 gsm |
Camping tents, event marquees, military shelters |
| PVC Inflatable Fabric |
0.6–1.5 mm thickness |
Boats, inflatable rides, air dancers, water toys |
| PVC GYM Fabric |
500–750 gsm |
Fitness bags, water weights, training equipment |
| PVC Truck Tarpaulin |
500–650 gsm |
Truck covers, trailer curtains, logistics protection |
| PVC Construction Fabric |
340–900 gsm |
Building enclosures, scaffolding covers, dust barriers |
| PVC High Speed Door Fabric |
700–1050 gsm |
Industrial rolling doors, cold storage curtains |
Application Fit and Material Selection
Choosing the right PVC coated tarpaulin depends on the load-bearing scrim, coating weight, and surface treatment. We help you match these variables to your end-use environment.
- Membrane structures: Use high-tensile 1000D×1000D scrims with 30×30 density and 1150 gsm coating for wind load and long-span roofs.
- Tents and temporary shelters: Balance weight and strength with 1000D×1000D 20×20 scrims in 610–650 gsm, offering easy handling and reliable waterproofing.
- Inflatable products: Specify airtight coatings with high-frequency weldability; we offer 0.6–1.5 mm thicknesses with non-slip or glossy finishes.
- Truck and logistics: Use 610 gsm 1000D×1000D 18×18 fabric for tear resistance and abrasion protection during transport.
- High-speed doors: Choose 700–1050 gsm with reinforced edges for repeated flexing and temperature extremes.
Critical Specifications and Customization
We produce to your required gram weight, yarn density, and width. Standard features include blockout performance, matte or glossy finish, and flame retardancy to B1, M2, or NFPA 701. Our fabrics operate from -20°C to 70°C, and we can add UV stabilizers, anti-mildew agents, or anti-bacterial treatments.
For printed patterns or solid colors, we support custom color matching and printing. We also adjust physical properties like tensile strength, tear resistance, and softness based on your application. Our in-house laboratory tests each batch for basis weight, tensile, tear, adhesion, and hydrostatic head to ensure consistency.
Quality Assurance and Testing
Our factory follows ISO 9001 procedures, and we conduct incoming, in-process, and final inspections. For tent fabrics, we perform seven key checks: identification, basis weight, yarn density, tensile strength, tear strength, coating adhesion, and water resistance. We also run application-specific tests like UV aging, cold crack, and flame retardancy when required.
We provide test reports and certificates for each shipment, including hydrostatic head results and flame retardant classifications. This documentation supports your own quality control and helps you meet regulatory requirements in your market.
Integration and Installation Support
Our fabrics are designed for sewing and high-frequency welding. We provide technical guidance on seam construction, welding parameters, and handling to ensure your fabrication process runs smoothly. For large projects, we can coordinate roll widths and lengths to minimize waste and optimize cutting layouts.
We also offer advice on installation for membrane structures, including pre-tensioning and anchoring considerations, based on our experience with stadium and canopy projects.
Maintenance and Service
PVC coated tarpaulins require minimal maintenance. Regular cleaning with water and mild detergent keeps the surface free of dirt and extends lifespan. For long-term outdoor use, we recommend periodic inspection of seams and edges. We supply spare rolls and can advise on repair patches for field fixes.
Our customer service team responds within 12 hours during working days, and we support after-sales technical questions. We also offer packaging in rolls with protective wrapping to prevent damage during transit.
Information We Use to Configure Your Solution
To prepare an accurate quotation and sample, please provide the following details:
- Application and end-use environment (e.g., outdoor tent, inflatable boat, truck cover)
- Required weight (gsm) or thickness (mm)
- Yarn count and density if specified (e.g., 1000D×1000D 20×20)
- Width and roll length
- Color, finish (matte/glossy), and any printing needs
- Flame retardancy or other certifications required
- Quantity and delivery destination
With this information, we can recommend the most suitable fabric grade and confirm technical specifications before production.
Frequently Asked Questions
What is the typical lead time for PVC coated tarpaulin orders?
Lead time depends on the specification and quantity. Standard fabrics are usually produced within 2-3 weeks after order confirmation. Custom colors or special treatments may require additional time. We provide a confirmed schedule with your quotation.
Can you match a specific color or print pattern?
Yes, we offer custom color matching and can print logos or patterns. Send us a Pantone reference or sample, and we will develop the color to your approval before mass production.
Do you provide samples for testing?
We provide free samples for standard products, with shipping costs covered by the customer. For custom specifications, we can produce pre-production samples for your evaluation.
What certifications do your fabrics meet?
Our fabrics are manufactured under ISO 9001 quality management. Flame retardancy options include B1, M2, and NFPA 701. We can also test for other standards like EN 13501 if required.
How do you ensure consistent quality across large orders?
We control the entire production process, from weaving to coating, and conduct batch testing for weight, strength, and adhesion. Each roll is inspected before shipment, and we provide test reports for your records.
Contact us
Home