Large Span Roof Membrane PVC Fabric
Large span roof membrane PVC fabric is a structural coated textile specified where clear spans exceed the practical limits of conventional panel roofing. The material is built on a high-tenacity polyester base cloth, typically 1670 to 2200 dtex, encapsulated with a PVC compound and finished with an acrylic or PVDF topcoat. It is supplied as factory-welded panels cut to the engineered pattern and installed under pretension across cable nets, masts, or steel trusses. Panel geometry, seam direction, and curvature are set by finite element analysis rather than by standard modular sizes. The grade is used for stadium and arena roofs, transport terminal covers, exhibition halls, and industrial enclosures where long clear spans, low dead load, and predictable surface drainage are required simultaneously.
Finite Element Verification
Stress distribution, deflection, and cable forces are verified by FEA for every span. Panel patterns are generated from the resolved geometry, and cutting tolerances are held within a few millimeters per panel to preserve pretension.
Cable and Mast Networks
Ridge cables, valley cables, and edge catenaries carry the membrane load to masts or boundary structures. Cable diameter and pretension are sized together with the membrane grade, since one cannot be changed without affecting the other.
Drainage Geometry
Surface curvature sets the drainage path and slope. Low points must be coordinated with gutters and outlets before patterns are cut, as post-installation changes to the drainage plan require panel remanufacture.
Thermal and Seismic Movement
Panels accommodate thermal expansion and seismic drift through sliding edge connections and controlled pretension. Boundary details must allow movement without introducing local stress concentrations in the membrane.










Home